Casella CEL-350 dBadge Micro Noise Dosimeter
- Part Number/Description
- Cart
- Price
Casella dBadge CEL-350
Personal Sound Exposure Meter
These powerful and innovative badge style noise dosimeters are popular due to their small size and large feature set. They are very simple to use and are capable of storing workplace parameters for various regulations.
Casella CEL’s CEL-350 dBadge series of personal sound exposure meters are used to measure sound levels in the work place to protect workers and comply with workplace regulations. The CEL-350 dBadge series consists of the CEL-350 and the CEL-352 dBadge Plus. Unlike traditional sound level meters the CEL-350 dBadge is small, requires no cables or external equipment to operate, and weights only 71 g. It can be worn comfortably on the shoulder or another area of clothing and is operated through two keys on the side of the instrument.
The CEL-350 offers the additional ability to measure noise time history and the ability to graph this data through PC software. Building on the capabilities of the CEL-350 sound exposure meters, the CEL-352 ‘Plus’ simultaneously measures ‘A’ and ‘C’ weighted Leq measurements, suitable to calculate the effectiveness of by either the SNR or HML methods. All models require no setup and are easy to operate.
Powered by an integral NiMH battery the CEL-350 dBadge achieves approximately 28 hours of operational use and can be fully recharged in 90 minutes. The CEL-350 series features a durable rubber overmoulded design, an integrated display, easy auto-calibration, a visual exposure alarm which may be switched on or off, and sufficient non-volatile memory to retain measurements for many consecutive shifts (up to 180 hours of data). The CEL-350 dBadge supports a linear operating range of 65–140.3 dB and a peak measurement range of 95–143.3 dB. Intrinsically safe CEL-350 models are available for use in hazardous environments.
CEL-350 dBadge Series Features
- Logs and measures all workplace noise parameters
- Suitable for wearing on the shoulder in the workplace
- Small and light weight (weighs only 71g)
- Simple auto-calibration capabilities
- Integrated display with visual sound exposure alarm
- Simultaneous ‘C’ and ‘A’ weighted measurements (CEL-352 ‘Plus’)
- Memory for 180 hours of data; software for easy transfer to PC
- Up to 28 hours of operational use through integrated NiMH battery
- Battery requires only 90 minutes to be fully recharged
- Intrinsically safe models available
CEL-350 dBadge Series Comparison
| Feature | CEL-350 | CEL-352 |
|---|---|---|
| Culmulative Dose Data | Yes | Yes |
| Time History Profiling | Yes | Yes |
| HML Parameters | Yes |
- Rent a Similar Product
- Save money by renting from Equipco
Casella CEL-350 dBadge IS Micro Noise Dosimeter
These dosimeters are approved for use in hazardous areas and have been granted IS approval (ATEX number Sira 07ATEX2032X). They are also classified for use in Class 1, Div 1, Groups A, B, C and D T2 (FM report 3029871)
- Part Number/Description
- Cart
- Price
Casella CEL-352 Plus IS Micro Noise Dosimeter
These dosimeters are approved for use in hazardous areas and have been granted IS approval (ATEX number Sira 07ATEX2032X). They are also classified for use in Class 1, Div 1, Groups A, B, C and D T2 (FM report 3029871).
- Part Number/Description
- Cart
- Price
Casella CEL-350/352 Accessories
- Part Number/Description
- Cart
- Price
- CEL-120/2Single level (114 dB at 1 kHz) Class 2 acoustic calibrator
- Order
- Call for Price
- CEL-2521/2″ General Purpose Electret Microphone Free Field Incidence
- Order
- Call for Price
- CEL-6351Standard mounting clip for dBadge pack of 5 sets
- Order
- Call for Price
- CEL-6352Alligator mounting clip for dBadge pack of 5 sets
- Order
- Call for Price
- CEL-6353Harness mounting clip for dBadge pack of 5 sets
- Order
- Call for Price
- CEL-6354Hard hat mounting clip for dBadge pack of 1 set
- Order
- Call for Price
- CEL-6355Kit case for up to 12 dBadge micro dosimeters and standard accessories
- Order
- Call for Price
- CEL-6356Replacement windscreens for dBadge pack of 5
- Order
- Call for Price
- CEL-63623 way master charger unit for all dBadges includes PC18 power supply
- Order
- Call for Price
- CEL-PC18Universal power supply and charger unit 110/240 VAC to 12 VDC with worldwide adapters
- Order
- Call for Price
- CEL-63633 way slave charge for all dBadges includes C6359/0.2 link cable
- Order
- Call for Price
- 193102B3 way master dBadge charger base unit only (less cable and power supply)
- Order
- Call for Price
- C6359/0.2Link cable from master charger to slave charger for dBadges
- Order
- Call for Price
- Insight DInsight Plug-in for CEL-35X Series micro noise dosimeters
- Order
- Call for Price
- 193200BInfra red interface adapter with integral high speed USB connector
- Order
- Call for Price
- D8147/ZHarness with belt and shoulder strap for dBadge
- Order
- Call for Price
- CEL-350/UP352Upgrade a CEL-350 to a CEL-352 Plus to add LC-A calculation
- Order
- Call for Price
WARNING: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov